What size bolt is S30400?
| Material | Size | Length |
|---|---|---|
| 304 Stainless Steel Bolts | M02 to M33 | 3 mm to 200 mm |
What is UNS S30400?
What is UNS S30400? This grade of steel is an austenitic stainless steel. It is the most common grade of stainless steel, offered in an extensive types of variants, forms and surface finishes than any other type of stainless steel.
What are the properties of bolts?
Other mechanical properties of steel bolts include:
- Fatigue strength. The maximum stress a fastener can endure for a specific number of cycles before failing.
- Torsional strength. The torque load at which a fastener fails by becoming twisted off at its axis.
- Hardness.
- Ductility.
- Toughness.
What is the hardness of 304 SS?
Table 1: Summary of mechanical properties for 304 steel.
| Mechanical Properties | Metric | English |
|---|---|---|
| Tensile Yield Strength | 215 MPa | 31200 psi |
| Hardness (Rockwell B) | 70 | 70 |
| Modulus of Elasticity | 193-200 GPa | 28000-29000 ksi |
| Charpy Impact | 325 J | 240 ft-lb |
What does JDF mean on a bolt?
JDF NINGBO JINDING CHINA. THE TONG HWEI CHINA-TAIWAN.
Is standard for SS bolt?
Stainless Steel 304 Bolts are made up of a basic austenitic stainless steel material that has 18% chromium and 8% nickel in the composition….Specification Chart Stainless Steel 304 Fasteners.
| Stainless Steel 304 Fasteners Specifications | ASTM A193 / A193, ASME SA193 / SA194 |
|---|---|
| Stainless Steel Grades | SS 304 |
What does S30400 mean on a bolt?
ASTM A182 UNS S30400 is a forging material specification for S30400 grade stainless steel and is used for manufacturing bare forgings or forged and machined products for applications involving high temperature service.
What hardness is a bolt?
Mechanical Properties – Steel Screws and Bolts ISO 898-1 EN 20898-1
| Property Class | 8.8 | |
|---|---|---|
| <= 16mm | ||
| Surface Hardness | maximum | 320 |
| HV 0.3 | ||
| Yield Stress | nominal value |
How strong is a 4.8 bolt?
Metric steel bolts, screws and studs – proof and tensile strength.
| Property Class | Size Range (mm) | Minimum Tensile Strength (106 Pa) |
|---|---|---|
| 4.6 | M5 – M36 | 400 |
| 4.8 | M1.6 – M16 | 420 |
| 5.8 | M5 – M24 | 520 |
| 8.8 | M1.6 – M36 | 830 |
Is 304 a low alloy steel?
Austenitic stainless steel (AISI 304) and low alloy steel (AISI 4140) possess a good combination of mechanical properties, formability, weldability, and resistance to stress corrosion cracking and other forms of corrosion [1], [2].
Does 304 SS work harden?
Stainless steel 304 cannot be hardened by heat treatment. Solution treatment or annealing can be done by rapid cooling after heating to 1010-1120°C.
What does S30400 stand for?
S30400 Stainless Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet. .
What is the corrosion resistance of UNS S30400?
This allows the uns s30400 bolt and other fasteners to have a degree of corrosion resistance against general corrosive services. The material is also capable of operating under temperatures up to 870 degrees Celsius. The fasteners of this material grade are used under high pressure applications as well.
What are SS 304 bolts and nuts?
SS 304 Bolts And Nuts are some of the most used fasteners on the planet. The considerable strength, corrosion resistance and the low cost of the material are the reasons for the widespread use of fasteners in this material grade.
What is ASTM A182 UNS S30400?
ASTM ASTM A182 UNS S30400 ASTM A182 UNS S30400 is a forging material specification for S30400 grade stainless steel and is used for manufacturing bare forgings or forged and machined products for applications involving high temperature service.