How do I reset my BT WIFI password?
How to reset your admin password on your BT Hub if you’ve forgotten it
- Open a new web browser on a device connected to your Hub and type 192.168.1.254 in the address bar.
- Press and hold the Wireless WPS button until the light on the front of your BT Smart Hub 2 flashes blue.
How do I access my BT Hub 3 settings?
How to open the Hub Manager
- Open a new web browser.
- Type 192.168.1.254 into the address bar.
- This will open the Hub Manager.
- If you want to make any changes to the hub settings, you’ll need the admin password. You’ll find it on the back of the Hub if you haven’t updated it.
How do I change my Smart Hub password?
SmartHub with Voice – Change the Wi-Fi Password
- Sign in to the Admin Web Interface .
- From the Smarthub Home screen, click. Network. .
- From Network, click the. Edit icon. to the right of Wi-Fi Password to configure Primary Network or Guest Network password. Click the.
- Click. Save. (at the bottom).
How do I reset my BT Home Hub?
- Find the recessed “Factory Reset” pinhole button on the back of your Hub.
- Using a paper clip or similar press the button and hold for 20 seconds. Your Hub lights will go out and your Hub will restart.
- Wait a few minutes for the Hub lights to settle. The central Power light will go blue when the Hub is ready to use.
What is my BT admin password?
The admin password is on the Hub settings card on the back of the Hub. The admin password is the Hub settings card on the back of the Hub, or on the label on the base. The admin password on the Hub settings card or on the label on the base.
How do I reset my BT Home Hub 3?
- Find the recessed “Reset” pinhole button on the back of your Hub.
- Using a paper clip or similar press the button and hold for 20 seconds. Your Hub lights will go out and your Hub will restart.
- Wait a few minutes for the Hub lights to settle. The central Power light will go blue and the Broadband light will be off.
How can I change my broadband WIFI password?
How to change your Wi-Fi password
- Enter the router’s IP address in your internet browser.
- Check the bottom, back, or side of the router for the IP address.
- Log into your router’s configuration page.
- Look for the “Wireless”, “Wireless Security” or “WLAN” option.
- Enter the new password in the “Wi-Fi Password” box.
How do I factory reset my hub 3?
How do I reset my BT YouView box?
Performing a factory reset
- Make sure your box is connected to the internet.
- Open the Menu.
- Select Settings*
- From Information & reset select Factory reset.
- Select Reset.
- Enter the numbers you see on screen to confirm you want to reset your box.
- Your box will now reset itself and we’ll walk you through the setup again.
How do I change my 192.168 0.1 password?
TP-Link:
- Login to Router admin panel using its default IP Address – 192.168.0.1 / 192.168.1.1.
- Enter the default username and password (admin/admin in most cases).
- Navigate to Wireless > Wireless Security > WPA/WPA2 – Personal (Recommended) > Password .
- Enter your preferred password and Save the change.