How strong is Tuftex?
Made with a polycarbonate thermoplastic polymer in an octagonal-wave profile, TUFTEX PolyCarb corrugated panels are 20 times stronger than 5 oz. Fiberglass corrugated panels and are designed to withstand a wide range of surface temperatures: 270° F to -40° F.
Is Tuftex polycarbonate UV resistant?
TUFTEX Universal Ridge and Trim is made of tough, UV-resistant polycarbonate.
What do you cut Tuftex with?
Cutting: Cut single panels of TUFTEX with a pair of snips or heavy duty scissors. Multiple panels may be cut using a circular saw with a plywood blade reversed or a fine-tooth handsaw. Side Laps and End Laps: Seal all side laps and end laps with a silicone sealer, vinyl adhesive or PVC cement.
How thick are Tuftex panels?
All TUFTEX PolyCarb panels are 26 inches wide and are available in 8 ft. and 12 ft. lengths. The corrugation height is 9/16 inch.
How long do polycarbonate roof panels last?
10 to 20 years
Longevity. Both types of polycarbonate roofing last anywhere from 10 to 20 years. Some manufacturers however do warranty their products for the lifetime use of the home.
Can you use corrugated plastic for greenhouse?
One of the strongest greenhouse coverings, polycarbonate, is a rigid plastic that is almost as transparent as glass. It is available in corrugated single layer or flat twin-wall thicknesses, and is easily cut and installed.
Are polycarbonate panels waterproof?
Polycarbonate panels are resistant to extreme temperature either hot or cold, sunlight, snow, rain, and impact. This enables the panels to last for many many years without fading or discoloring while also remaining damage free from any various impacts over the years.
How do you fix polycarbonate sheets on a greenhouse?
All holes on the wooden panels should be drilled prior to polycarbonate sheet installation. The sheets can then be cut using a fine tooth circular saw or a hand saw. The roof panel should be installed on every timber support. You should fix these two components using stainless steel screws.