How deep can a concrete saw cut?
12 to 14-inches
They can cut through 12 to 14-inches of concrete. It is wise to use a strong power source for cut-off machines to increase their speed. They also become simpler to use and are less noisy. This is even more so if the main focus is on the depth of the cut as opposed to the noise created when in an enclosed environment.
How deep can you cut with a 14-inch concrete saw?
A 14-inch circular blade on a cut-off saw is designed for a maximum depth of slightly less than five inches.
What is the best tool to cut concrete?
Use a standard circular saw, equipped with a corundum or diamond blade, for small tasks. For slabs, it’s best to cut through the top inch, then use a sledgehammer to break off the rest. The jagged edge left below the cutting line provides a good rough edge for the new concrete to bond to.
Is it better to saw cut concrete?
Saw cuts are a used to create control joints in concrete, which help control where cracking occurs due to shrinkage. The cuts should be made at a predetermined spacing and only after the concrete has obtained sufficient strength but before internal cracking begins. Therefore, the timing of saw cuts is critical.
How deep will a 20 concrete blade cut?
8″
| Cured Concrete/Asphalt Blades | ||
|---|---|---|
| Diameter | Cutting Depth* | |
| 20″ | (508mm) | 8″ |
| 24″ | (610mm) | 10″ |
| 26″ | (660mm) | 10-5/8″ |
How deep can a 16 inch concrete saw cut?
Diamond Blade Cutting Depths
| Maximum Blade Cutting Depths | |
|---|---|
| Concrete Saw Blades | |
| 12″ | 3 5/8″ |
| 14″ | 4 5/8″ |
| 16″ | 5 5/8″ |
How deep will a 20 concrete saw cut?
| Cured Concrete/Asphalt Blades | ||
|---|---|---|
| Diameter | Cutting Depth* | |
| 20″ | (508mm) | 8″ |
| 24″ | (610mm) | 10″ |
| 26″ | (660mm) | 10-5/8″ |
How deep will a 12 inch concrete saw cut?
| Cured Concrete/Asphalt Blades | ||
|---|---|---|
| Diameter | Cutting Depth* | |
| 12″ | (305mm) | 4″ |
| 14″ | (356mm) | 5″ |
| 18″ | (457mm) | 7″ |
How long will a diamond blade last cutting concrete?
How long will a diamond blade last cutting concrete? According to experts, a low-quality diamond blade can only last around 12 hours of non-stop cutting, while high-quality blades can cut materials up to 120 hours. Another thing that can affect the blade’s life is the material you are cutting.