Is DensShield good for showers?
DensShield® Tile Backer is ideal for bathrooms, showers, floors, kitchens and other wet, high humidity areas.
What is the cost of DensShield?
DensShield® Tile Backer is an ideal tile backer board for high moisture areas because it has a built-in moisture barrier that stops moisture at the surface….Georgia-Pacific® DensShield® 1/2 x 48″ x 96″ Tile Backer at Menards®
| Everyday Low Price | $29.99 |
|---|---|
| 11% Mail-In Rebate Good Through 4/2/22 | $3.30 |
What is DensShield drywall used for?
It’s the ideal ceramic tile underlayment for new construction, bathroom remodeling, pool areas, and many other high humidity or wet areas1. Easier to handle than cement board, DensShield Tile Backer cuts and installs like drywall without special tools or fasteners. It can also be painted or used in non-wet areas.
Can DensShield be used outside?
DensShield Tile Backer should not be used in commercial saunas, steam rooms, around fireplaces or areas where prolonged exposure to heat exceeds 125° F (52° C). DensShield Tile Backer panels should not be used as a shower pan base. DensShield Tile Backer should not be used for exterior installations.
What size sheets does DensShield come in?
DensShield 1/2 in. x 4 ft. x 8 ft.
What thickness does DensShield come in?
Standards and Code Compliance – DensShield Tile Backer in 1/4” (6.4 mm), 1/2” (12.7 mm) and 5/8” (15.9 mm) thicknesses conforms to current IRC and IBC codes and is manufactured to meet ASTM C1178 as a fiberglass mat gypsum substrate for use as tile backer.
What is the best backer board to use in a shower?
Cement board
Cement board is a good, reliable backer board that works well on both floors and walls. Keep in mind that most tile setters err on the side of caution and brush a waterproofing membrane on top of cement board when it is in wet areas like showers or tub surrounds.
Which side faces out on DensShield?
DensShield Tile Backer may be hung either vertically or horizontally for wall applications. Grey coated side should always face out, away from the studs.
How do you cut a hole in DensShield?
Do not leave gaps between panels. DensShield Tile Backer may be cut by using a utility knife to score, then snap, working from the grey face side.
Can I use densarmor plus panels as a backer board?
DensArmor Plus panels can be used as a tile backer board in dry areas or areas with limited moisture contact such as areas adjacent to sinks and toilets, bathroom ceilings and areas above tile in residential shower areas.
Why densdeck ® roof board?
Why DensDeck ® Roof Board? The patented DensDeck ® design employs glass mat facings front and back that are embedded into a water-resistant gypsum core providing excellent fire resistance, moisture resistance, and wind uplift properties.
What is the ASTM C840 standard for densarmor plus panels?
DensArmor Plus panels should be installed according to the most current versions of Gypsum Association Publication GA-216 “Application and Finishing of Gypsum Panel Products” and ASTM C840 “Standard Specifi cation for Application and Finishing of Gypsum Board for Non-Fire Rated Construction.”
What is the Dental Board of California RDA?
Close Search Dental Board of California The Dental Board of California licenses and regulates over 100,000 licensees; consisting of dentists (DDS), registered dental assistants (RDA), and registered dental assistants in extended functions (RDAEF).