What is a bump cap for?
“Bump caps are designed for small lacerations or bumps where the wearer comes into contact with the hazard. It’s a very basic protection that won’t provide the same level of protection against impacts that a normal industrial hard hat would,’ explained Rodgers.
Are bump caps OSHA approved?
Bump caps are not ANSI approved; therefore, they are not OSHA approved. Bump caps do not protect against falling objects.
Do bump caps come in different sizes?
Most bump caps in the marketplace today are not only static plastic “bowls,” but also just one-size-fits-all.
How long does a bump cap last?
If you work under extreme conditions, such as exposure to high temperatures, chemicals, or sunlight, hard hats should be replaced after two years of use. In addition, some manufacturers even recommend replacing the suspension in your hard hat every 12 months.
Can you wear bump caps on building sites?
Are Bump Caps Allowed on Construction Sites? Probably not. There is no hard and fast rule here, except the suitability of the headwear for the environment you are in. If it’s possible that someone could drop a brick on your head, then a bump cap is not going to protect you in the way a hard hat would.
Are bump caps CSA approved?
Wearing a rigid plastic bump cap, aerated or not, with or without suspension, can very well do the trick. Be careful, however; these caps are not CSA approved. They do not offer much protection against impacts from flying or falling objects and even less against punctures.
Are bump caps allowed on site?
Who uses Bumpcaps?
Bump caps are safety equipment that protect the wearer from minor head bumps and lacerations, but not from falling or flying objects.
Can bump caps replace hard hats?
Whereas a bump cap is designed to protect you from worker-generated impacts, so, you banging your head on something. We talk about that because it’s an important note to make because bump caps will never replace a hard hat. It’s not a substitute.
Is a bump cap considered PPE?
It is true that this class of protective headgear doesn’t meet any OSHA and/or ANSI Standard or requirement, and yes it is considered as personal protective equipment. Honeywell offer this equipment for people who work in areas where they are liable to bump their heads on stationary objects present in their workplace.
How much does a bump cap weigh?
Bump Cap, Red, w/Plastic Suspension
Part Number: | 10033653 |
---|---|
Length: | 10.236 IN (260.000 MM) |
Width: | 7.480 IN (190.000 MM) |
Height: | 5.512 IN (140.000 MM) |
Weight: | 0.441 LB (0.200 KG) |
Are bump caps mandatory?
You should use safety bump caps when there is a risk of impact between the head and stationary objects such as low ceilings, the underside of a vehicle (for mechanics, especially) and overhead piping.