Does Samba use DNS?
Uses the Samba server’s local lmhosts file. hosts. Uses the standard Unix name-resolution methods, which can be /etc/hosts, DNS, NIS, or a combination, depending on how the local system is configured. wins.
How do I configure DNS?
Windows
- Go to the Control Panel.
- Click Network and Internet > Network and Sharing Center > Change adapter settings.
- Select the connection for which you want to configure Google Public DNS.
- Select the Networking tab.
- Click Advanced and select the DNS tab.
- Click OK.
- Select Use the following DNS server addresses.
Can Samba be a domain controller?
Starting from version 4.0, Samba is able to run as an Active Directory (AD) domain controller (DC). If you are installing Samba in a production environment, it is recommended to run two or more DCs for failover reasons.
Can Samba replace Active Directory?
Support for cross-forest trusts and multiple domain controllers is still to come. When that support arrives, Samba will be truly useful as an Active Directory replacement.
What information is not in a DNS stub zone?
Stub zones do not contain all of the resource records from the zone, as the primary and secondary zone types do. Instead, only a subset of records populates the zone, just enough to provide the client with the information necessary to locate a DNS server that can respond to a query for records from the zone.
How do I find my Samba server name?
1. Command Line. To query the network for Samba servers, use the findsmb command. For each server found, it displays its IP address, NetBIOS name, workgroup name, operating system, and SMB server version.
What is Samba 4 Active Directory?
Samba can operate as a standalone file and print server for Windows and Linux clients through the SMB/CIFS protocol suite or can act as an Active Directory Domain Controller or joined into a Realm as a Domain Member. The highest AD DC domain and forest level that currently Samba4 can emulate is Windows 2008 R2.
Can you install Active Directory on Linux?
For all intents and purposes, all Active Directory accounts are now accessible to the Linux system, in the same way natively-created local accounts are accessible to the system.
How do I connect Samba to Active Directory?
To add a Samba server to an Active Directory domain:
- Edit /etc/samba/smb.conf and configure the [global] section to use ADS: [global] security = ADS realm = KERBEROS.REALM.
- Install the krb5-server package: # yum install krb5-server.
What DNS back-ends does Samba support?
All clients and server in an AD must use a DNS server that is able to resolve the AD DNS zones. Samba supports the following DNS back ends: Default when provisioning a new domain, joining an existing domain or migrating an NT4 domain to AD. No additional software or DNS knowledge is required.
What are the system requirements to use bind with samba?
Requires BIND 9.8 or later installed and configured locally on the Samba Active Directory (AD) domain controller (DC). For additional information, see Setting up a BIND DNS Server. Requires knowledge about the BIND DNS server and how to configure the service.
How to set up a SAMBA Active Directory (AD) domain controller (DC)?
If you are planning to set up a Samba Active Directory (AD) domain controller (DC) using the BIND9_DLZ back end, you have to install and configure the BIND DNS server first. The following describes how to set up a basic BIND installation you can use as Samba AD DC back end.
What is the difference between samba’s internal DNS and forward zones?
By default, Samba creates the following two forward zones during provisioning/upgrading (of course with your own domain name): samdom.example.com: Zone for your domain. _msdcs.samdom.example.com: This is the ForestDNSZone, that contains several service records for the entire directory. The Samba internal DNS is a new implementation.