How do I find my DNS-323?
The simplest way to access your DNS-323 is to use theEasy Search Utility provided on the CD-ROM. Thiswill automatically detect any DNS-323 devices on your network,allow you to set up network drives in Windows, perform basicconfiguration and access the web configuration interface.
How do I reset my DNS-323?
To reset the DNS-313/323, access the management (web GUI), go toTOOLS – SYSTEM and press Restore. Allow a minute for the device to reset. If you cannot reach the web UI, locate the reset button on theback of the DNS-313/323.
How do I update the firmware on my Dlink DNS-323?
Step 1: Download the latest firmware from http://www.dlink.com. Step 2: Once you’ve downloaded the firmware, open a web browser and log into your D-Link DNS-323. Step 3: Enter your username (admin) and your password. Click Configuration to enter the web configuration for the device.
What DNS-323?
The D-Link® 2-Bay Network Storage Enclosure (DNS-323) when used with two internal 3.5” SATA drives1 enables you to share documents, files, and digital media such as music, photos, and video with everyone on your home or office network.
How do I connect to DNS-323?
Your setup may look slightly different.
- Configure the DNS-323 for access from your network.
- Go to Setup > Device.
- Browse into the DNS-323 using Windows Explorer and create the directory structure you wish to use.
- Log into the DNS-323 configuration pages and go to Advanced > Users.
- Go to Advanced > Network Access.
How do I map a DNS-323 drive?
Step 1: For Vista or Win7 this command line is located right above the Windows Button., Click Start and Click Run ,and type \\IP of D-Link DNS-323 (eg. \\192.168. 0.132) and press OK. Step 2: Right Click the drive/folder in which to access and Select Map Network Drive (Volume_1 used in this example).
How do I access my Dlink network drive?
- Click Start > All Programs > Accessories > Run.
- Type \\ IP address of the router (default is 192.168.0.1)
- Example- \\192.168.0.1.
- Click OK.
- If you are prompted to enter a Username and Password, enter the credentials that you use to log in to the router’s web-based configuration utility.
How do I access my DNS 320?
How to Access the Web Interface of the DNS-320 Remotely using D-Link Router
- Put a check mark on the row to enable the rule.
- Enter a name for the policy you would like to create.
- Enter the IP Address of the DNS-320 (On Step 2)
- Enter Port 80 both on Public and Private port.
Why is the easysearch utility not detecting a dns-323 device?
A common reason for the EasySearch Utility not being able to detect a DNS-323 device on thenetwork is due to a particular setting in Windows. Note: theinstructions below refer to Windows XP. The same settings can beapplied to Windows 2000 and Windows Vista, however the screens maydiffer from the screenshots below
How do I use the D-Link easy search utility?
It is recommended to use the D-Link Easy Search Utility to access and the DNS-323. The D-Link Easy Search Utility is provided on the product CD or can be downloaded from our . support site. Step 1 Launch the D-Link Easy Search Utility. Step 2 Highlight your DNS-323 and click Configuration. Step 3 The Web based utility will
Why can’t I Find my dns-323 on the network?
I cannot find my DNS-323 on the network using the Easy Search Utility. Is my DNS-323 broken? A common reason for the EasySearch Utility not being able to detect a DNS-323 device on thenetwork is due to a particular setting in Windows. Note: theinstructions below refer to Windows XP.
What happens if I upgrade the firmware for the dns-323?
New firmware for the DNS-323 often affects the way hard drives are formatted and the way files are handled. To avoid potential complications and loss of files, please back up all files to another location before upgrading firmware.