What is a yoke u-joint?
A u-joint (universal joint) is basically a flexible pivot point that transmits power through rotational motion between two shafts not in a straight line. A universal joint in its simplest form consists of two shaft yokes at right angles to each other and a four-point cross that connects the yokes.
Who makes Toyota U joints?
The OEM driveshaft and u-joints are made by Spicer, you should just get the Spicer u-joints from an aftermarket supplier as landphil pointed out. It’s $20 vs.
What is the lifespan of AU joint?
U-joints can last decades, or they can break when the vehicle is still new. That’s why it’s a good idea to check the u-joints at every oil change. A typical rear wheel drive vehicle has 2 or 3 u-joints. Some vehicles with a long wheel base, such as buses, have 3 or more u-joints.
How do you measure a yoke?
Button up the shirt and spread the shirt out on its front. Measure for the point where the yoke meets the sleeve, straight across, to the same point on the other side. When taking this measurement, pull the two ends of the yoke tight but don’t stretch it.
How do you measure a driveshaft yoke?
How To Measure for a Driveshaft
- End yoke to end yoke (Measure from the center of one U-Joint to the center of the other U-Joint)
- Spline to end yoke (Measure from the tip of the spline to the center of the U-Joint)
- Flange to flange (Measure from the face of the first flange to the face of the 2nd Flange)
How long should u-joints last?
Do you grease new U-joints?
Installation Procedure (Con’t) NOTE: The u-joint must be greased prior to installation. There is only enough grease in a new MOOG u-joint to keep the needles in place during assembly, which is not sufficient for operational lubrication.
Do you grease U-joints?
The most common cause of a U-Joint failure is lack of proper greasing. A maintenance schedule that includes greasing your U-Joints will help prevent premature failure of parts. The goal of greasing your U-Joints is to keep clean grease around the needle bearings.